Home / Joya News / Practical Advice for Using Tile Adhesive

Practical Advice for Using Tile Adhesive

  • Update:30-12-2016
  • Abst:

    A Tile Adhesive is required for the bottom of a tile to […]

    Tile Adhesive is required for the bottom of a tile to bond to the surface of the setting bed. This is the surface prepared to receive the tile and its accuracy and preparation is very important to the final product, whether it be wall tiles or floor tiles. It has lots of types of adhesives available and you should choose one of them relying on whether the floor or wall is dry or wet, whether it is indoors or outdoors and whether the surface on which it is to be applied is concrete, wood or drywall. Use of adhesives is best done without allowing too much of the material into the surface, as such excess material may come to the surface and cause problems for tile cleaning.

    Tile adhesive is available for fixing tiles to the walls or floors. Glue is already present on these tiles. When water is sprayed on the tile, the glue on the tile re-emulsifies. However, the common notion that excess of glue helps in better fixing of tiles is wrong. In fact, the excess glue that is present between the glout strings must be wiped off as it can lead to scratching.

    Tile backers help in fixing the tiles properly. It is also vital to select a good adherent for your house or office. These adhesives act as supporters that fix the bottom of the tile to another surface like a wall or a floor. This is also known as setting the bed cot.

    Tile adhesives have also changed with times. Now they are of much better quality and there are a variety of adhesives available like the regular tile adhesive and the flexible tile adhesive. Each adherent has a different use. These are quite easy to use. In fact, people can also lay these tiles themselves. This not only saves cost that would have otherwise been wasted in paying the professionals whom you would have employed for laying of tiles.

    Different Types of Tile Adhesive

    - Organic Mastics - these are useful products as they come pre-mixed. This means you can use the adhesive straight from the tube. Organic mastic is useful for wall tile projects as it offers instant hold. This means that tiles will not slip out of place as you are fixing them. However organic mastics are not very effective in areas which are exposed to heat or the elements such as cooker splashbacks and outside spaces.

    - Thin-set Mortar - this is a popular type of tile adhesive that can be mixed to the exact consistency required. Thin-set mortar is widely used as it offers a much stronger bonding finish and more flexibility than other adhesives. Thin-set Mortar can be used in areas with varying heat temperatures and air moisture such as kitchens, bathrooms and external spaces. There are several different types of thin-set mortar mixes available. This provides plenty of choice when it comes to your home DIY projects.

    - Latex Mortar - this type of tile adhesive has additives that reduce the water absorption and increase the bonding strength. Latex mortar can be used for both wet and dry installations. It can also be mixed to a thicker consistency to make a suitable adhesive for handcrafted tiles that have uneven rear surfaces.

    Using Tile Adhesive

    You also need to understand the drying times when you use tile adhesive. If you remove the spacers between the tiles too soon they could slip out of place before they are dry. With the faster drying tile adhesive products you will need to work more quickly to put the tiles in place before the adhesive hardens. Double check all the manufacturers instructions before you start your project so that you can plan each step accurately.