Solvent Based Adhesive
Home / Product / Solvent Based Adhesive
  • PVC film,PVC and Aluminum lamination,121℃ Solvent Based AdhesiveEH6060A/B +
  • EH6060A/B

    Type of Adhesive: High Grade, two component solvent based(EA) polyurethane adhesive

    Application EH6060A/B is suitable for laminating :

    Aluminum Foil

    Pre-treated PE films

    Pre-treated PP /CPP films

    Pre-treated PET films

    Pre-treated PA films,

    Unplasticized PVC films, etc.

    Properties

    Solvent based ashesive EH6060A/B is recommended for high performance lamination. Beside its high heat resistance, it is used for flexible packages which are exposed to retorting(e.g. 121℃/40minutes). Especially for Film/Foil structure.

    It complied with US FDA 21 CFR175.105 .

    Typical specification

    Item EH6060A EH6060B
    Appearance Light yellow Colorless or light yellow
    Solid Content (%) 60±2 60±2
    Viscosity(mPa• s,25℃) 2500±1000 500±200
    Solvent EAC EAC
    Mixing Ratio(By weight) 20 4
    Shelf Life 360days 300days

    Recommended Operating Conditions

    Application Method                                       Direct gravure                           

    Application Cylinder                                      80-120lines                            

    Application Solids                                          25-40%(recommend 30%)                

    Pot Life                                                           8hours by dynamic, 24hour by static       

    Dry Coating weight                                        4.0-5.5gsm                              

    Drying Section Temperature                       50~60℃/60~70℃/70~80℃(three section)     

    Laminating Temperature                             50~80℃ depending on films                 

    Cure Time(before slitting)                            60hours(50±5℃)                         

    Dilution Table

    In order to obtain a certain solids, the following quantities of solvent(Ethyl Acetate) are recommended.

    EH6060A(kg) EH6060B (kg) EAC(kg) Solid Content (%) Viscosity,seconds

    (25℃,Zahn Cup #3)

    20 4 33.6 25 13.5
    20 4 24 30 16.5
    20 4 17.1 35 23

    Ethyl Acetate, Acetone and Methyl Ethyl Ketone provided that the water content does not exceed 300ppm. Aromatic and alcoholic solvents are not suitable.

    Package

    EH6060A is 20kg/drum, EH6060B is 4kg/drum.

    4            8

  • Low Viscosity Solvent Based AdhesiveEN1175A/B +
  • EN1175A/B

    Type of Adhesive: General Grade, low viscosity, two component solvent based(EA) polyurethane adhesive

    Application EN1175A/B is suitable for laminating :

    Pre-treated PE films

    Pre-treated PP films

    Pre-treated PET films

    Pre-treated PA films

    Metalized films, etc.

    Properties

    Solvent based adhesive EN1175A/B is an economical adhesive for the general range of flexible packaging, it’s suitable to use for transparent lamination as well as for triplex lamination. EN1175A/B has good machine ability and a good wettability.

    Due to the low viscosity, EN1175A/B can be applied at very high solids content up to 45% which make the lower usage of EAC to reduce the manufacturing cost.

    It complied with US FDA 21 CFR175.105 .

    Typical specification

    Item EN1175A EN1175B
    Appearance Light yellow Colorless or light yellow
    Solid Content (%) 75±2 75±2
    Viscosity(mPa• s,25℃) 1500±300 2000±1000
    Solvent EAC EAC
    Mixing Ratio(By weight) 20 4
    Shelf Life 360days 300days

    Recommended Operating Conditions

    Application Method                                       Direct gravure                           

    Application Cylinder                                      150-200lines                            

    Application Solids                                           35-50%(recommend 40%)                

    Pot Life                                                            8hours by dynamic, 24hour by static       

    Dry Coating weight                                        2.0-3.5gsm                              

    Drying Section Temperature                       50~60℃/60~70℃/70~80℃(three section)     

    Laminating Temperature                             50~80℃ depending on films                 

    Cure Time(before slitting)                            24hours(50±5℃)                         

    Dilution Table

    In order to obtain a certain solids, the following quantities of solvent(Ethyl Acetate) are recommended.

    EN1175A(kg) EN1175B (kg) EAC(kg) Solid Content (%) Viscosity,seconds

    (25℃,Zahn Cup #3)

    20 4 27.4 35 12~13
    20 4 21 40 13~14
    20 4 16 45 14~18
    20 4 12 50 19~21

    Ethyl Acetate, Acetone and Methyl Ethyl Ketone provided that the water content does not exceed 300ppm. Aromatic and alcoholic solvents are not suitable.

    Package

    EN1175A is 20kg/drum, EN1175B is 4kg/drum.

    42            36

  • Plastic film, Plastic and Aluminum lamination,135C° Solvent Based AdhesiveEH6160A/B +
  • EH6160A/B

    Type of Adhesive: High Grade, two component solvent based(EA) polyurethane adhesive

    Application EH6160A/B is suitable for laminating :

    Aluminum Foil

    Pre-treated PE films

    Pre-treated PP /CPP films

    Pre-treated PET films

    Pre-treated PA films,

    Unplasticized PVC films, etc.

    Properties

    Solvent based adhesive EH6160A/B is recommended for high performance lamination. Beside its high heat resistance, it is used for flexible packages which are exposed to retorting(e.g. 135℃/30minutes). Especially for Film/Foil structure.

    It complied with US FDA 21 CFR175.105 .

    Typical specification

    Item EH6160A EH6160B
    Appearance Light yellow Colorless or light yellow
    Solid Content (%) 60±2 75±2
    Viscosity(mPa• s,25℃) 2500±1000 2000±1000
    Solvent EAC EAC
    Mixing Ratio(By weight) 20 4
    Shelf Life 360days 300days

    Recommended Operating Conditions

    Application Method                                       Direct gravure                           

    Application Cylinder                                      80-120lines                            

    Application Solids                                          25-40%(recommend 30%)                

    Pot Life                                                           8hours by dynamic, 24hour by static       

    Dry Coating weight                                       4.0-5.5gsm                              

    Drying Section Temperature                      50~60℃/60~70℃/70~80℃(three section)     

    Laminating Temperature                            50~80℃ depending on films                 

    Cure Time(before slitting)                           96hours(50±5℃)                         

    Dilution Table

    In order to obtain a certain solids, the following quantities of solvent(Ethyl Acetate) are recommended.

    EH6160A(kg) EH6160B (kg) EAC(kg) Solid Content (%) Viscosity,seconds

    (25℃,Zahn Cup #3)

    20 4 36 25 13~15
    20 4 26 30 15~20
    20 4 18.9 35 20~28

    Ethyl Acetate, Acetone and Methyl Ethyl Ketone provided that the water content does not exceed 300ppm. Aromatic and alcoholic solvents are not suitable.

     Package

    EH6160A is 20kg/drum, EH6160B is 4kg/drum.

    2                pic_06

  • Solvent Based Adhesive Special for Aluminum laminationEM3075A/B +
  • EM3075A/B

    Type of Adhesive: Boiling Grade, two component solvent based(EA) polyurethane adhesive

    Application EM3075A/B is suitable for laminating :

    Pre-treated PE films

    Pre-treated PP films

    Pre-treated PET films

    Pre-treated PA films

    Metalized films,

    Cellophane,etc.

    Properties

    Solvent based adhesive EM3075A/B specially perform excellent bond strength on film/Metalized film lamination. Transparent lamination can be pasteurized, boiled and sterilized.

    For laminating sterilization-proof film/Metalized film(e.g. 100℃/30minutes), we strongly recommend our

    EM3075A/B.

    It complied with US FDA 21 CFR175.105 .

    Typical specification

    Item EM3075A EM3075B
    Appearance Light yellow Colorless or light yellow
    Solid Content (%) 75±2 60±2
    Viscosity(mPa• s,25℃) 3500±1000 10-60
    Solvent EAC EAC
    Mixing Ratio(By weight) 20 4
    Shelf Life 360days 300days

    Recommended Operating Conditions

    Application Method                                       Direct gravure                           

    Application Cylinder                                      120-150lines                            

    Application Solids                                           25-40%(recommend 30%)                

    Pot Life                                                            8hours by dynamic, 24hour by static       

    Dry Coating weight                                        3.0-3.5gsm                              

    Drying Section Temperature                        50~60℃/60~70℃/70~80℃(three section)     

    Laminating Temperature                              50~80℃ depending on films                 

    Cure Time(before slitting)                              24hours(50±5℃)                         

    Dilution Table

    In order to obtain a certain solids, the following quantities of solvent(Ethyl Acetate) are recommended.

    EM3075A(kg) EM3075B (kg) EAC(kg) Solid Content (%) Viscosity,seconds

    (25℃,Zahn Cup #3)

    20 4 45.6 25 12~13
    20 4 34 30 13~14
    20 4 25.7 35 15~16
    20 4 19.5 40 16~17

    Ethyl Acetate, Acetone and Methyl Ethyl Ketone provided that the water content does not exceed 300ppm. Aromatic and alcoholic solvents are not suitable.

    Package

    EM3075A is 20kg/drum, EM3075B is 4kg/drum.

    15           14

  • Boiling and Reinforce Solvent Based AdhesiveEM3175A/B +
  • EM3175A/B

    Type of Adhesive: Boiling Grade, two component solvent based(EA) polyurethane adhesive

    Application EM3175A/B is suitable for laminating :

    Aluminum Foil

    Pre-treated PE films

    Pre-treated PP films

    Pre-treated PET films

    Pre-treated PA films

    Metalized films, etc.

    Properties

    Solvent based adhesive EM3175A/B specially perform excellent bond strength on film/Aluminum lamination. Transparent lamination can be pasteurized, boiled and sterilized.

    For laminating sterilization-proof film/film(e.g. 100℃/30minutes, vacuum bags), we strongly recommend our

    EM3175A/B.

    It complied with US FDA 21 CFR175.105 .

    Typical specification

    Item EM3175A EM3175B
    Appearance Light yellow Colorless or light yellow
    Solid Content (%) 75±2 75±2
    Viscosity(mPa• s,25℃) 3500±1000 3000±1000
    Solvent EAC EAC
    Mixing Ratio(By weight) 20 4
    Shelf Life 360days 300days

    Recommended Operating Conditions

    Application Method                                       Direct gravure                           

    Application Cylinder                                      120-150lines                            

    Application Solids                                           25-40%(recommend 30%)                

    Pot Life                                                            8hours by dynamic, 24hour by static       

    Dry Coating weight                                        3.0-3.5gsm                              

    Drying Section Temperature                       50~60℃/60~70℃/70~80℃(three section)     

    Laminating Temperature                             50~80℃ depending on films                 

    Cure Time(before slitting)                            24hours(50±5℃)                         

    Dilution Table

    In order to obtain a certain solids, the following quantities of solvent(Ethyl Acetate) are recommended.

    EM3175A(kg) EM3175B (kg) EAC(kg) Solid Content (%) Viscosity,seconds

    (25℃,Zahn Cup #3)

    20 4 48 25 12~13
    20 4 36 30 14~15
    20 4 27.4 35 17~18
    20 4 21 40 21~22

    Ethyl Acetate, Acetone and Methyl Ethyl Ketone provided that the water content does not exceed 300ppm. Aromatic and alcoholic solvents are not suitable.

    Package

    EM3175A is 20kg/drum, EM3175B is 4kg/drum.

    1.1           34

  • Common widely use Reinforce Solvent Based AdhesiveEN1075A/B +
  • EN1075A/B

    Type of Adhesive: General Grade, Two component solvent based(EA) polyurethane adhesive.

    Application EN1075A/B is suitable for laminating :

    Pre-treated PE films

    Pre-treated PP films

    Pre-treated PET films

    Pre-treated PA films

    Metalized films, etc.

    Properties

    Solvent based adhesive EN1075A/B is an economical adhesive for the general range of flexible packaging, it’s suitable to use for transparent lamination as well as for triplex lamination. It can be applied at the high working solid which makes the product very economic. EN1075A/B has good machine ability and a good wettability.

    It complied with US FDA 21 CFR175.105 .

    Typical specification

    Item EN1075A EN1075B
    Appearance Light yellow Colorless or light yellow
    Solid Content (%) 75±2 75±2
    Viscosity(mPa• s,25℃) 2500±500 2000±1000
    Solvent EAC EAC
    Mixing Ratio(By weight) 20 4
    Shelf Life 360days 300days

    Recommended Operating Conditions

    Application Method                                       Direct gravure                           

    Application Cylinder                                     120-180lines                            

    Application Solids                                          25-40%(recommend 35%)                

    Pot Life                                                            8hours by dynamic, 24hour by static       

    Dry Coating weight                                        2.0-3.5gsm                              

    Drying Section Temperature                       50~60℃/60~70℃/70~80℃(three section)     

    Laminating Temperature                             50~80℃ depending on films                 

    Cure Time(before slitting)                            24hours(50±5℃)                         

    Dilution Table

    In order to obtain a certain solids, the following quantities of solvent(Ethyl Acetate) are recommended.

    EN1075A(kg) EN1075B (kg) EAC(kg) Solid Content (%) Viscosity,seconds

    (25℃,Zahn Cup #3)

    20 4 48 25 12~13
    20 4 36 30 13~14
    20 4 27.4 35 14~15
    20 4 21 40 16~17

    Ethyl Acetate, Acetone and Methyl Ethyl Ketone provided that the water content does not exceed 300ppm. Aromatic and alcoholic solvents are not suitable.

    Package

    EN1175A is 20kg/drum, EN1175B is 4kg/drum.

    23             18

  • Fast Dry, Totally curied in 8-12 hours Solvent Based AdhesiveEM3472A/B +
  • Instruction

    Solvent based adhesive EM3472A/B is a two-component ethyl acetate soluble polyurethane adhesive designed for laminating aluminum foil and plastic film. It is suitable for vacuum supply, boiling, etc, in dry lamination of soft package.

    Function

    1. Lamination film has the features of good initial adhesion, high transparency, high peeling strength, etc.      
    2. It has a good performance of wetting to the film, and it’s especially good at coating process with economical efficiency.
    3. It conforms to the Food Hygiene Law of the P.R.C.
    4. It conforms to the Adhesive regulations for food packaging of China National Adhesives Industry Association.

    Physical Nature

    Chart 1.The Physical Nature of EM3472A and EM3472B

    Item

    EM3472A

    EM3472B

    Appearance

    Light yellow transparent liquid

    Colorless or light yellow transparent liquid

    Solid Content (%)

    72±2

    75±2

    Viscosity(mPa• s,25℃)

    2500±500

    2000±1000

    Solvent

    EAC

    EAC

    Mixing Ratio(Weight)

    20

    4

    Chart 2. The Changes of Solid Content and Viscosity during the Dilution

    EM3472A(kg)

    EM3472B (kg)

    EAC(kg)

    Solid Content (%)

    Viscosity,seconds

    (25℃,Zahn Cup #3)

    20

    4

    48

    25

    12~13

    20

    4

    36

    30

    13~14

    20

    4

    27.4

    35

    14~15

    20

    4

    21

    40

    16~17

    Attention: The moisture of EAC, no more than 300ppm, is the most suitable solvent for dry lamination. In addition, MEK, TO, ACETONE etc., whose moisture is no more than 300ppm, also can be used as solvent. It will reduce The effective content of hardener when there is active hydrogen, such as alcohol, amine, in the solvent.

    38                       26

  • Solvent Based Adhesive Special for Aluminum and Film LaminationEM3072A/B +
  • EM3072A/B

    Type of Adhesive: Boiling Grade, two component solvent based(EA) polyurethane adhesive

    Application EM3072A/B is suitable for laminating :

    Aluminum Foil

    Pre-treated PE films

    Pre-treated PP films

    Pre-treated PET films

    Pre-treated PA films

    Metalized films,

    Cellophane,etc.

    Properties

    Solvent based adhesive EM3072A/B specially perform excellent bond strength on film/Foil lamination. Transparent lamination can be pasteurized, boiled and sterilized.

    For laminating sterilization-proof film/film(e.g. 100℃/30minutes), we strongly recommend our EM3072A/B.

    It complied with US FDA 21 CFR175.105 .

    Typical specification

    Item EM3072A EM3072B
    Appearance Light yellow Colorless or light yellow
    Solid Content (%) 72±2 75±2
    Viscosity(mPa• s,25℃) 5000±1000 2000±1000
    Solvent EAC EAC
    Mixing Ratio(By weight) 20 4
    Shelf Life 360days 300days

    Recommended Operating Conditions

    Application Method                                       Direct gravure                           

    Application Cylinder                                      120-150lines                            

    Application Solids                                           25-40%(recommend 30%)                

    Pot Life                                                             8hours by dynamic, 24hour by static       

    Dry Coating weight                                          3.0-3.5gsm                              

    Drying Section Temperature                          50~60℃/60~70℃/70~80℃(three section)     

    Laminating Temperature                                 50~80℃ depending on films                 

    Cure Time(before slitting)                                24hours(50±5℃)                         

    Dilution Table

    In order to obtain a certain solids, the following quantities of solvent(Ethyl Acetate) are recommended.

    EM3072A(kg) EM3072B (kg) EAC(kg) Solid Content (%) Viscosity,seconds

    (25℃,Zahn Cup #3)

    20 4 45.6 25 12~13
    20 4 34 30 14~15
    20 4 25.7 35 17~18
    20 4 19.5 40 21~22

    Ethyl Acetate, Acetone and Methyl Ethyl Ketone provided that the water content does not exceed 300ppm. Aromatic and alcoholic solvents are not suitable.

    Package

    EM3072A is 20kg/drum, EM3072B is 4kg/drum.

    JYE3072A                  JYE3072B

     

    01                  25

  • Aluminum and Film lamination Reinforce Solvent Based AdhesiveEM3172A/B +
  • Instruction

    Solvent based adhesive EM3172A/B is a two-component ethyl acetate soluble polyurethane adhesive designed for laminating aluminum foil and plastic film. It is suitable for vacuum supply, boiling, etc, in dry lamination of soft package.

    Function

    1. Lamination film has the features of good initial adhesion, high transparency, high peeling strength, etc.
    2. It has a good performance of wetting to the film, and it’s especially good at coating process with economical efficiency.
    3. It conforms to the Food Hygiene Law of the P.R.C.
    4. It conforms to the Adhesive regulations for food packaging of China National Adhesives Industry Association.

    Physical Nature

    Chart 1.The Physical Nature of EM3172A and EM3172B

    Item EM3172A EM3172B
    Appearance Light yellow transparent liquid Colorless or light yellow transparent liquid
    Solid Content (%) 72±2 75±2
    Viscosity(mPa• s,25℃) 5000±1000 2000±1000
    Solvent EAC EAC
    Mixing Ratio(Weight) 20 4

    Chart 2. The Changes of Solid Content and Viscosity during the Dilution

    EM3172A(kg) EM3172B (kg) EAC(kg) Solid Content (%) Viscosity,seconds

    (25℃,Zahn Cup #3)

    20 4 45.6 25 12~13
    20 4 34 30 14~15
    20 4 25.7 35 17~18
    20 4 19.5 40 21~22

    Attention: The moisture of EAC, no more than 300ppm, is the most suitable solvent for dry lamination. In addition, MEK, TO, ACETONE etc., whose moisture is no more than 300ppm, also can be used as solvent. It will reduce The effective content of hardener when there is active hydrogen, such as alcohol, amine, in the solvent.

    31                      27

     

  • Common use and Economic Solvent Based AdhesiveEM1075A/B +
  • Instruction

    Solvent based adhesive EM1075A/B is a common and economic two-component ethyl acetate soluble polyurethane adhesive designed for general structure. This product is suitable for the lamination among PE, PP, PET and PA. It has good performance of lamination.

    Function

    1. Lamination film has the features of good initial adhesion, high transparency, high peeling strength, etc.
    2. It has a good performance of wetting to the film, and it’s especially good at coating process.
    3. It conforms to the Food Hygiene Law of the P.R.C.
    4. It conforms to the Adhesive regulations for food packaging of China National Adhesives Industry Association.

    Physical Nature

    Chart 1.The Physical Nature of EM1075A and EM1075B

    Item EM1075A EM1075B
    Appearance Light yellow transparent liquid Colorless or light yellow transparent liquid
    Solid Content (%) 75±2 75±2
    Viscosity(mPa• s,25℃) 2500±500 2000±1000
    Solvent EAC EAC
    Mixing Ratio(Weight) 20 4

    Chart 2. The Changes of Solid Content and Viscosity during the Dilution

    EM1075A(kg) EM1075B (kg) EAC(kg) Solid Content (%) Viscosity,seconds

    (25℃,Zahn Cup #3)

    20 4 48 25 12~13
    20 4 36 30 13~14
    20 4 27.4 35 14~15
    20 4 21 40 16~17

    Attention: The moisture of EAC, no more than 300ppm, is the most suitable solvent for dry lamination. In addition, MEK, TO, ACETONE etc., whose moisture is no more than 300ppm, also can be used as solvent. It will reduce The effective content of hardener when there is active hydrogen, such as alcohol, amine, in the solvent.

    19                                   5

  • Common Boiling use Solvent Based AdhesiveEM2175A/B +
  • Instruction

    Solvent based adhesive EM2175A/B is a two-component ethyl acetate soluble polyurethane adhesive with high solid content and high transparency, can be used for the lamination among aluminum foil, PE,PP,PET and PA. It’s especially good at flexible package of dry lamination, such as plastic-plastic vacuum supply and so on. It 's suitable for  pasteurization

    Function

    1. Lamination film has the features of good initial adhesion, high transparency, high peeling strength, etc.
    2. It has a good performance of wetting to the film, and especially good at coating process with economical efficiency.
    3. It conforms to the Food Hygiene Law of the P.R.C.
    4. It conforms to the Adhesive regulations for food packaging of China National Adhesives Industry Association.

    Physical Nature

    Chart 1.The Physical Nature of EM2175A and EM2175B

    Item

    EM2175A

    EM2175B

    Appearance

    Light yellow transparent liquid

    Colorless or light yellow transparent liquid

    Solid Content (%)

    75±2

    75±2

    Viscosity(mPa• s,25℃)

    3500±1000

    3000±1000

    Solvent

    EAC

    EAC

    Mixing Ratio(Weight)

    20

    4

    Chart 2. The Changes of Solid Content and Viscosity during the Dilution

    EM2175A(kg)

    EM2175B (kg)

    EAC(kg)

    Solid Content (%)

    Viscosity,seconds

    (25℃,Zahn Cup #3),

    20

    4

    48

    25

    12~13

    20

    4

    36

    30

    14~15

    20

    4

    27.4

    35

    17~18

    20

    4

    21

    40

    21~22

    Attention: The moisture of EAC, no more than 300ppm, is the most suitable solvent for dry lamination. In addition, MEK, TO, ACETONE etc., whose moisture is no more than 300ppm, also can be used as solvent. It will reduce The effective content of hardener when there is active hydrogen, such as alcohol, amine, in the solvent.

    39            33

Our products drums
Feedback
  • +upload image
  • How would you prefer to be contacted ?     EmailPhoneFax