Instruction

JYF-5430T, a mid-soft hydrophilic high moisture permeability of polyurethane adhesive, used as surface coating resin after base resin, suitable for direct coating.

1. Specifications:

Appearance: Milky white liquid

Solid components: 30 ± 1%
Viscosity: 20000-30000 CPS/25 ℃
Solvent: TOL, DMF, IPA
Tensile strength  : 30-45 MPa

2. Attention:
1) The use of solvents to control the moisture content of the request are as follows:
MEK 0.1% below
2) Solvent moisture content too high, substantial impact on quality;
3) Complete with sealed to prevent infiltration of water vapor;

3. Storage: Please placed in a cool dry place and avoid direct sunlight and away from fire;

4. Save: normal storage conditions, save for six months;

5. Package: 180 KGS / DRUM

Instruction

JYF-5450B, a hydrophilic non-pass high moisture permeability of polyurethane adhesive, used as direct primer coating resin.

1. Specifications:

Appearance: Light yellow liquid

Solid components: 45 ± 1%
Viscosity: 50000-60000 CPS/25 ℃
Solvent: TOL, MEK, IPA
Tensile strength  : 30-45 MPa
2. Attention:
1) The use of solvents to control the moisture content of the request are as follows:
MEK          0.1% below
2) Solvent moisture content too high, substantial impact on quality;
3) Complete with sealed to prevent infiltration of water vapor;

3. Storage: Please placed in a cool dry place and avoid direct sunlight and away from fire;

4. Save: normal storage conditions, save for six months;

5. Package: 180 KGS / DRUM